Fuse Riveting Session 3

Bekah and I were able to get into the garage last night for an hour or so.  In general just continued riveting through the fuse.  I also was able to get out the sealant and seal up the firewall.  This is important so that no fumes get into the cabin from the engine compartment or fire in the case of an emergency.  Basically its a layer of sealant between the side and bottom skins and the firewall.  I can't rivet this yet since there are hinges that hold on the cowling down the road, so for now its just a cleco in every hole to hold it as tight as possible while the sealant dries.